CS452 - Real-Time Programming - Fall 2010

Lecture 2 - Polling Loops

Pubilic Service Announcements

  1. Administrative details
  2. Assignment 0 Deadline
  3. Combination to the trains lab
  4. How to compile and run your first program: pdf
  5. UART overview as we go along.
  6. Bloomberg, September 15 at 19.00 in TC2218.

Busy Waiting

This is used to synchronize with an external event, minimizing response time.

#define FOREVER for( ; ; )
FOREVER {
   while( !ready( ) ) ;
   do-it( );
}

or in another form

FOREVER {
   if ( ready( ) ) do-it( );
}

Sometimes you only want to do the thing once, as you do when putting a character on a serial line.

#define UART1_BASE        0x808c0000
#define UART_DATA_OFFSET        0x00    // low 8 bits
#define UART_FLAG_OFFSET        0x18    // low 8 bits
#define TXFF_MASK               0x20    // Transmit buffer full

        flags = (int *)( UART1_BASE + UART_FLAG_OFFSET );
        data = (int *)( UART1_BASE + UART_DATA_OFFSET );
        while( ( *flags & TXFF_MASK ) ) ;
        *data = c;

Worst case response time

From the time that the ready bit sets until the first instruction of do-it is executed

The problem with busy-waiting

What if the CPU has to two things at once?

E.g.,

  1. collect bytes coming in a serial port
  2. maintain a clock

Unless the rate of bytes coming in and rate of clock ticks are identical

Polling Loops

Polling loops allow you to manage more than one condition/activity pair at the same time.

The basic polling loop

FOREVER {
  if( c1 ) a1;
  if( c2 ) a2;
  ...
  if( cN ) aN;
}

Worst case response time

Testing more than once

Suppose you want a better response time for a1. Then try the loop

FOREVER {
  if( c1 ) a1;
  if( c2 ) a2;
  if( c1 ) a1;
  if( c3 ) a3;
  ...
  if( c1 ) a1;
  if( cN ) aN;
}

Worst case response time for a1

Breaking into pieces

Suppose the response time is still too long, because the execution of one action, say a2, is too long. Then you can break a2 into two parts

FOREVER {
  if( c1 ) a1;
  if( c2 ) { a2.1; half-done = TRUE; }
  if( c1 ) a1;
  if( half-done ) { a2.2; half-done = FALSE; }
  ...
}

This is strarting to get a little complicated and we haven't said anything about inter-action communication

Assignment 0: pdf

Overall System

Provided and maintained by CSCF

TS-7200

`COM' ports

Connected to UARTs

Only really two

Ethernet port

Reset switch

Timers

EP-9302

System on chip

Memory

Byte addressable, word size 32 bits

Separate instruction and data caches

Software

Compiler

GNU tool chain

RedBoot

Partial implementation

Returns when program terminates

Busy-wait IO

COM2 uses monitor; COM1 goes to train

  1. initialization
  2. output
  3. input

Return to: